Timber Flooring in Templestowe: Planning a Floor for a Big House
Large Templestowe homes raise their own flooring questions: one board over several levels, big open rooms, feature stairs and ordering enough of one batch.
Read the guide
Quick answer
Engineered oak suits most Glen Waverley homes, from 1970s to 1990s brick veneer to new two-storey rebuilds. On a concrete slab it is usually glued down; on a suspended timber floor it can be glued or floated once the base is sound. For big open-plan rooms, run one floor in one direction and choose a light or neutral tone.
The engineered oak flooring Glen Waverley homeowners ask us about works well in both of the house types you see most in the suburb: the 1970s to 1990s brick veneer homes and the newer two-storey rebuilds. The board itself is rarely the hard part. What decides the job is the subfloor (concrete slab or timber on stumps), whether the floor is glued or floated, and picking a tone that suits a big open-plan space. Get those three right and most of our engineered oak range will suit.
A lot of Glen Waverley was built from the 1970s through the 1990s: single and double-storey brick veneer, often with a formal lounge at the front and a family room at the back. Many of those houses have been renovated, and more have been knocked down and replaced with large two-storey homes with open-plan living across the ground floor.
Those two types usually mean two different subfloors. Newer builds are almost always on a concrete slab. Older brick veneer homes can be on a slab or on a suspended timber floor, sometimes both if there has been an extension. It is worth knowing which you have before you look at samples, because it changes how the floor is installed and what preparation is needed.
On a concrete slab, engineered oak is usually glued straight down. The slab needs to be flat and dry, so moisture testing and some grinding or levelling are common on older slabs. New slabs need time to dry before timber goes down, which matters if you are building and want the floor in quickly. Our guide to timber flooring on a concrete slab goes through the checks.
On a suspended timber floor, the existing boards or particleboard need to be sound and level. Loose or squeaky sections get fixed first. Many of our engineered oak boards can be glued down or floated, so the installer picks the method that suits the base and the room.
| Subfloor | Common method | What usually needs doing first |
|---|---|---|
| New concrete slab | Glued down | Confirm the slab is dry enough; check flatness |
| Older concrete slab | Glued down | Moisture test, grind high spots, level low spots |
| Suspended timber floor | Glued or floated | Fix loose or squeaky boards, check level |
| Mixed (extension) | Depends on each area | Plan the transition between slab and timber |
The big ground floors in Glen Waverley rebuilds suit a single floor running through living, dining and kitchen. A few things make that look right:
Board size matters in a big room too. Most of our engineered oak planks are 1900 × 190 mm, and some, such as Maison Grey, are 15 mm thick with a 4 mm oak wear layer. A wider board can suit a very large space, but a 190 mm board in a long open-plan room still looks generous.
Light and neutral tones are the most common choice for new builds: pale oak, soft greys and natural tones that keep a large ground floor bright. Older homes with darker joinery or brick feature walls can take a warmer mid-brown.
Some practical points:
Look at samples in your own light, morning and afternoon, and next to your cabinetry and tiles. Our guide on how to choose a timber floor colour has more on this, and the full engineered oak range is on the site.
Engineered oak comes in different grades, which describe how much natural character the boards show. A cleaner grade has fewer knots and more even colour. A mixed grade has more knots and colour variation, which many people like because it looks more natural and hides wear. Pure Oak, for example, is an AB grade with random lengths; several other boards in the range are ABCD, which shows more character. Neither is better. It comes down to the look you want.
If you are replacing carpet or tiles in an older Glen Waverley house, a few things come up on almost every job. The old floor covering has to come out, and tiles in particular can leave adhesive or an uneven surface that needs work before timber goes down. Door clearances change once the new floor is in, so some doors may need trimming. Skirting boards can stay and be finished with a trim, or come off and go back on over the new floor for a cleaner edge.
It also helps to decide early whether you are doing the whole ground floor at once. Doing it in stages is possible, but one continuous floor through the main rooms usually looks better and avoids extra transitions where the rooms meet.
Engineered oak is real timber, so it needs some care. Felt pads under furniture, a mat at the back door and wiping spills up promptly go a long way. It suits living areas, bedrooms, halls and kitchens. For laundries and bathrooms, hybrid is usually the better choice. If you are weighing it up, our article on engineered oak pros and cons is a straight comparison.
The quickest way to narrow it down is to bring a photo of your rooms and, if you have them, plans to the showroom at 2/1386 Toorak Road, Camberwell, or call 1300 690 160. We can then come out, look at the subfloor and measure up. Book a free measure and quote, and we will give you an itemised quote that shows the preparation as well as the flooring.
Questions
Yes. Engineered oak is usually glued straight to the slab, which gives a solid feel underfoot. A new slab needs to be dry enough before timber goes down, so ask your builder about timing and have the slab moisture-tested before installation.
Usually, once the existing floor is sound and level. Loose or squeaky boards are fixed first. Many of our engineered oak boards can be glued or floated, and the installer chooses the method that suits the base.
Light and neutral oak tones are the most common choice because they keep a big space bright and hide dust well. Mid-browns are forgiving with kids and pets. Look at samples in your own light before deciding.
It is better kept to living areas, bedrooms, halls and kitchens. For laundries and bathrooms, hybrid flooring usually copes better with water. Hybrid can go in those rooms, but not inside showers.
Book a free measure and quote. We look at the subfloor, measure the rooms and then send an itemised quote that shows the preparation work as well as the flooring, so you can compare it properly with other quotes.
Large Templestowe homes raise their own flooring questions: one board over several levels, big open rooms, feature stairs and ordering enough of one batch.
Read the guideMany Blackburn homes are mid-century houses on suspended floors, some with original hardwood boards. Here is how to plan a new timber floor around that.
Read the guideMost Balwyn homes can take herringbone. The real decision is engineered oak that is glued down or hybrid that floats, and that depends on the subfloor and the rooms.
Read the guide