Black Friday Sale20% OFFRRP on flooring · until Mon 30 NovShop the sale
中文 1300 690 160
Light oak-look hybrid flooring running from a family kitchen into the laundry in a Melbourne home

Comparisons

Hybrid Flooring Pros and Cons: An Honest Guide

2 November 20264 min readPrimecon Flooring

Comparisons

Quick answer

Hybrid flooring pros: highly water resistant (laundries and bathrooms, not showers), hard-wearing, quick click installation and attached underlay. Cons: not real timber, cannot be sanded or refinished, not approved for underfloor heating, and firmer and louder underfoot than timber.

The main hybrid flooring pros and cons are simple. On the plus side, hybrid handles water far better than timber or laminate, it is tough on scratches and dents, it clicks together quickly over most subfloors, and it comes with an attached underlay. On the minus side, it is not real timber, it cannot be sanded or refinished, it is not approved for underfloor heating, and it feels and sounds firmer underfoot than timber. If those trade-offs suit how you live, it is one of the most practical floors you can buy.

What hybrid flooring is

Hybrid is a rigid-core floor. Each board has a stone-plastic composite core, a printed timber-look layer, a clear wear layer on top and, in our range, an acoustic underlay already attached underneath. The boards click together and float over the subfloor rather than being glued.

Our hybrid boards come in 7 mm, 8 mm and 9 mm thicknesses, mostly 1524 or 1545 mm long and 228 mm wide, with a 0.5 mm wear layer. You can see them all in our hybrid range.

The pros

  • Water resistance. This is the big one. Hybrid is highly water resistant, so it can go in laundries and bathrooms, which timber and most laminate cannot. It is not for showers or anywhere with running water.
  • Hard-wearing surface. The wear layer stands up well to everyday traffic, chair legs, kids and pets. It is a popular choice for busy family homes and rentals.
  • Quick installation. Boards click together and float, so there is no glue and no curing time. Many rooms can be done in a day once the subfloor is ready.
  • Underlay included. The attached underlay saves a separate layer and helps with footfall sound.
  • Consistent look. The printed surface gives a uniform timber look across every board, which some people prefer to the natural variation of real timber.
  • One floor through more rooms. Because it copes with water, you can run the same floor from living areas into the laundry or bathroom without changing materials.

The cons

  • Not real timber. It looks like timber from standing height, but it does not feel like timber underfoot, and up close the printed grain repeats.
  • Cannot be sanded or refinished. When the wear layer eventually wears through in a high-traffic spot, the board is replaced rather than sanded back. Engineered timber can often be refinished; hybrid cannot.
  • Not for underfloor heating. Our hybrid range is not approved for underfloor heating. If you have or are planning heating in the slab, look at engineered timber instead.
  • Firmer and a bit louder. Even with the underlay, a rigid floor sounds and feels harder than timber. In apartments, check the building’s flooring rules first; our guide to soundproof flooring for apartments explains why.
  • Value over time. Many buyers see real timber as adding more to a home’s appeal than a timber-look floor, especially in period and high-end homes.

Hybrid at a glance

Question Hybrid Engineered timber
Laundries and bathrooms Yes, but not showers Better kept out of wet areas
Can it be refinished? No, boards are replaced Often yes, depending on wear layer
Underfloor heating Not approved Ask about suitable products
Feel underfoot Firm Warmer, real timber
Installation Click and float Glued or floated, depending on product

If you are also weighing up laminate, our hybrid vs laminate comparison covers that in detail. For the timber side, see engineered oak pros and cons.

Who hybrid suits

  • Families with young kids and pets. Spills, toys and claws are less of a worry. Our guide to the best flooring for dogs goes into more detail.
  • Rentals and investment properties. Hard-wearing and easy to look after between tenants.
  • Homes where one floor needs to run into wet areas. Laundries, bathrooms and kitchens on the same floor as living areas.
  • Quick renovations. When you want a new floor down fast without glue or long downtime.

It suits less well if you want the feel and character of real timber, have underfloor heating, or are renovating a period home where original-style timber matters.

A few common misunderstandings

  • “Waterproof means I can mop it with lots of water.” The boards resist water well, but the joins and edges still should not sit in standing water. A damp mop is all it needs.
  • “It never scratches.” The wear layer is tough, not indestructible. Grit under shoes and dragging heavy furniture can still mark it.
  • “It can go over any old floor.” It can go over many subfloors, but the base needs to be flat and sound. Soft carpet and loose boards come out first.
  • “All hybrid is the same.” Core thickness, underlay and wear layer vary between products, which changes how the floor feels and sounds.

Looking after a hybrid floor

Hybrid is one of the easiest floors to live with. Sweep or vacuum to remove grit, then damp mop with a neutral cleaner. Put felt pads under chairs and tables, use a mat at outside doors, and lift rather than drag heavy furniture. Wipe up spills and pet accidents when you see them, especially near the edges of the room. Avoid steam mops and harsh chemicals, which can damage the surface and the joins over time.

If a single board is badly damaged, it can usually be replaced without redoing the whole floor, so it is worth keeping a spare pack from the original order.

Choosing a thickness

In our range, the 9 mm boards have the thickest core and a 2 mm acoustic underlay, the 7 mm boards have a slimmer core with the same underlay, and the 8 mm boards are a 6.5 mm board with a 1.5 mm underlay. Thicker boards feel more solid underfoot and bridge small subfloor imperfections a little better. Any hybrid still needs a flat subfloor, because a floating floor shows dips and humps. Our guide to floating vs glue-down floors explains why.

Next step

The best way to judge hybrid is to stand on it and compare it with engineered timber in the same room. Visit the showroom at 2/1386 Toorak Road, Camberwell, or call 1300 690 160. When you are ready, book a free measure and quote.

Questions

Frequently asked questions

Is hybrid flooring waterproof?

Our hybrid range is highly water resistant and suitable for laundries and bathrooms, but not for showers or anywhere with running water. Standing water should still be wiped up, and the edges need to be finished properly around wet areas.

Can hybrid flooring be sanded?

No. Hybrid has a printed timber-look layer under a clear wear layer, so it cannot be sanded or refinished. A worn or damaged board is replaced instead. Engineered timber can often be refinished.

Can hybrid go over underfloor heating?

No. Our hybrid range is not approved for underfloor heating. If you have heating in the slab, talk to us about engineered timber products and check the specifications together.

Is hybrid good for pets?

It is a practical choice for pets because the wear layer resists scratches and it copes with accidents and water bowls better than timber. No floor is completely scratch-proof, so keep claws trimmed.

Which thickness of hybrid should I choose?

Thicker boards feel more solid underfoot and bridge small subfloor imperfections a little better, but every hybrid still needs a flat subfloor. We can show you 7, 8 and 9 mm boards side by side in the showroom.

Keep reading

Related guides

All guides

Primecon Flooring

Contact us

1300 690 160

Measure & quote

Step 1 of 2 · about 20 seconds

We will call you back within one business day. Your details are used only to respond to your enquiry.

Book a showroom visit

Showroom: 2/1386 Toorak Road, Camberwell. We will call you to confirm.

Free samples with a consultation

Free samples are provided when you meet one of our flooring consultants, at our Camberwell showroom or during a measure & quote at your home. Choose up to 3 floors and we will have them ready.

You haven’t chosen any floors yet. Open any product page and tap “Free samples” (up to 3).

Where would you like to see them?

My shortlist

Your shortlist is empty. Tap the ♥ on any floor to save it here.

Send the list to our team and we will get back to you with availability, sample options and an estimate.

Search

Type a floor name or colour, such as Coral Bay, oak or herringbone.

WeChat

Primecon Flooring WeChat QR code

Scan with WeChat to message us. 微信扫码添加,中文沟通。

On your phone? Tap to open in WeChat · 手机上点这里直接打开微信

中文咨询欢迎来电或到店。

Black Friday Sale

20% OFF

RRP on flooring products
until close of business Monday 30 November

See the offer
New: not sure which floor? Upload a photo and see it in your room →

Flooring products only. Installation services and custom orders are excluded.