Spotted Gum / Smooth
Australian Timber Species · 1820/2100 mm × 180 mm × 14 mm
Tallowwood Solid 18 mm
| Construction | Solid Australian hardwood |
|---|---|
| Species | Tallowwood |
| Dimensions | 1820–2100 × 130 mm or 1820–2100 × 136 mm |
| Thickness | 18 mm |
| Grade | Standard and better |
| Janka hardness (kN) | 8.6 |
| Profile | Tongue and groove |
| Finish | Prefinished, 12 coats water-based polyurethane |
| Slip resistance | D1 pass (AS 4586 Appendix B) |
| Warranty, residential | 25 years structural, 5 years coating |
| Warranty, commercial | 10 years structural, 3 years coating |
Pricing depends on the area, installation and subfloor preparation, so we prepare a quote for each job. Please call us on 1300 690 160 or visit our Camberwell showroom to see this floor in person.
Board size1820–2100 × 130 mm or 1820–2100 × 136 mm
Thickness18 mm
Surface & finishPrefinished, 12 coats water-based polyurethane
Tallowwood Solid 18 mm is Tallowwood all the way through the board, 18 mm thick with a tongue and groove profile. It comes prefinished from the factory with 12 coats of water-based polyurethane, so the floor is already finished when it arrives. There is no sanding and coating on site after it is laid. Widths are 130 mm or 136 mm, in random lengths of 1820–2100 mm, graded Standard and better.
Colour and grain
On our sample boards Tallowwood is a golden honey brown with an olive tinge, and some boards are noticeably darker than others. The grain is its main feature: bold arched figure and pale streaks running along the boards. It is less red than Spotted Gum or Kempas, which makes it easier to pair with greens, off-whites and natural stone. You will find it with our warm browns.
Hardness
Janka hardness is 8.6 kN, a little below solid Blackbutt at 9.1 kN and well below solid Spotted Gum at 11 kN. It is still a hard floor for a living room, bedroom or study. For a kitchen with big dogs, one of the harder species will hide dents better. Slip resistance is a D1 pass under AS 4586 Appendix B.
Where it suits
The strong figure shows up best in a larger room with plenty of daylight, where you can see the pattern across several boards. It works well in a renovated Californian bungalow or a newer family home that needs some warmth underfoot without going dark.
Installing it
Solid boards are usually secret-fixed to joists or battens, or laid over a slab on a suitable base. Solid timber shrinks and swells more with humidity than engineered board, so it is given time to acclimatise before laying. It is not suited to bathrooms or laundries. See the full solid timber range or our supply and install service.
Spotted Gum / Matte Brushed
Australian Timber Species · 1820/2100 mm × 180 mm × 14 mm
Blackbutt / Matte Brushed
Australian Timber Species · 1820/2100 mm × 180 mm × 14 mm
Questions
Frequently asked questions
Is Tallowwood hard enough for a busy home?
It rates 8.6 kN on the Janka scale, close to Blackbutt at 9.1 kN. That is fine for most living areas and bedrooms. If dents from pets or heavy furniture are the main concern, Spotted Gum or one of the Ironbarks will hold up better.
Should I choose 130 mm or 136 mm?
The difference is small and hard to see once the floor is down. We suggest the width we can best match to your room layout and any existing Tallowwood you are joining.
Can Tallowwood be sanded in future?
Yes. It is 18 mm of solid timber, so it can be sanded back more times over its life than an engineered board with a 3 mm wear layer.
What warranty comes with Tallowwood Solid 18 mm?
For homes, 25 years structural and 5 years on the factory coating. For commercial use, 10 years structural and 3 years on the coating. Structural cover is about the board itself; coating cover is about the finish. The exact term is confirmed on your quote, and our installation work and your Australian Consumer Law rights are separate.
Free measure & quote
Interested in this floor?
You can order a free sample, or book a free measure and quote and we will bring boards to your home.